Most people cannot avoid having ugly marks and stains on wooden objects in their homes.
Therefore, we have compiled this article to introduce the Best Stain Remover for Wood Deck & Wood Floor to those who meet that common issue.
Let’s learn how to recover the beauty of your house effortlessly with excellent products and the guide below!
What Is The Best Wood Stain Remover?
In summary, the best wood deck and floor stain remover, for me is Florida Laboratories ox5l OXALIC Acid 99.6%.
This natural substance is much more environment-friendly, safer, and more effective yet cheaper than the majority of wood stain removers on the market.
For higher quality, look at the list of the top 7 best stain removers for wood deck & wood floor review below.
In short, below is the list of the top Best Stain Removers for wood decks and wood floors:
#1. Florida Laboratories ox5l OXALIC Acid 99.6%
>>> Today’s Best Deal: Check Latest Price on Amazon
What is great about this product:
The Florida Laboratories ox5l OXALIC Acid 99.6% is not only the best stain remover for wood but also for many other materials such as crystal and metal.
You can use the powder to treat honeybee’s varroa mites and remove wood stains, rust, algae, and some other marks on almost all types of materials.
Furthermore, this natural substance is extremely economical, eco-friendly, and relatively safe for human health.
In fact, this is one of the cheapest and safest options among stain-removing products.
How to use:
The Florida Laboratories ox5l OXALIC Acid 99.6% is multi-functional, so as to focus on the main topic of this article, we will merely show you how to use it to remove wood stains.
Step 1: Wear safety gloves, glasses, and a mask.
Step 2: Dissolve 12 – 15 oz of oxalic acid powder per gallon of hot water.
Step 3: Use the solution while still hot, with a scrub brush. Apply the solution liberally band keep it remain on the stains until it has achieved your desired lightness.
If the solution cools down before you get the job done, reheat it (not by boiling).
Step 4: Rinse the area completely with water and leave it dry.
Step 5: When it is absolutely dry, sand the spot slightly.
Results:
In our tests, the Florida Laboratories ox5l OXALIC Acid 99.6% proves to be the best wood floor stain remover.
It worked well against stains on wood floors, staircases, exteriors, decks, boats, rust on metals, concretes, and crystals.
Pros
- The cheapest option
- Widely applicable
- Natural ingredients that are eco-friendly and safe for human
Cons
- The only downside of this substance is that it is a little trickier to use than others and requires more steps to apply.
#2. DEFY 300187 Stain Stripper
>>> Today’s Best Deal: Check Latest Price on Amazon
What is great about this product:
The DEFY 300187 Stain Stripper is a specialized product that is applicable to numerous types of wood, whether it is cleaned and brightened plank, only cleaned wood, weathered board, or those with one or two coats of stain.
Plus, it is also quick and convenient to use. There is no need for you to mix it up or do anything else. Just apply the chemical directly to the stained area.
How to use:
Step 1: Wear safety gloves, glasses, and mask.
Step 2: Pour the solution into a pump sprayer.
Step 3: Spray the fluid on the stains and wait for them to break down in about 20 – 30 minutes. During this time, remember to keep them wet by continuously adding extra strippers when they begin to dry.
Repeat this step for a longer time if needed.
Step 4: Use a pressure washer to rinse the spot thoroughly. This step is optional yet recommended to deliver the best result.
Results:
The DEFY 300187 Stain Stripper is particularly designed for handling semi-transparent stains, penetrating sealers, clearing wood finishes, and varnishes on almost all kinds of wood.
In addition to that, it is also capable of removing mold and mildew, mill glaze, and dirt to create a like-new wood surface.
Pros
- Suit multiple types of the wood surface
- Can remove various kinds of stains
- Quick and convenient to use
- Inexpensive
Cons
- This product is not strong enough to tackle hardheaded paint, film-forming coatings, and solid color stains.
#3. SaverSystems 300521 Stain Stripper Review
>>> Today’s Best Deal: Check Latest Price on Amazon
What is great about this product:
The SaverSystems 300521 Stain Stripper is the best wood deck stain remover. It manages to clear both oil-based and water-based finishes, eliminate weathered, semi-transparent stains, and penetrate wood sealers.
Each 1-gallon can of SaverSystems 300521 Stain Stripper is sufficient to apply on an extra-wide area of up to approx 100 – 150 square feet.
At a medium price, this product can be used for a long time and considered to be a budget-friendly choice for any customer.
How to use:
Step 1: Wear safety gloves, glasses, and a mask.
Step 2: Pour the chemical into a pump sprayer.
Step 3: Spray the fluid on the stains and wait for them to break down in about 30 – 60 minutes. During this time, remember to keep them wet by continuously adding extra strippers when they begin to dry.
Repeat this step for a longer time if needed.
Step 3: Use a pressure washer to rinse the spot thoroughly. This step is not mandatory yet still recommended to bring about the optimal result.
Results:
As we mentioned, this is the best stain remover for wood decks.
After applying the chemical on wood decks, wood siding, and fences, you will soon see worn finishes stripped, adhesion of stains improved, and the natural appearance of wood restored.
Pros
- Great for exterior wood objects
- Can eliminate multiple types of stains well
- Easy to use
- Budget-friendly choice
Cons
- This product is not intended for handling stubborn paint, film-forming coatings, and solid color stains.
#4. Sunnyside 657G1A Paint & Varnish Remover Review
>>> Today’s Best Deal: Check Latest Price on Amazon
What is great about this product:
The Sunnyside 657G1A Paint & Varnish Remover is a super-strong cleaner that can remove up to more than 10 layers of varnish, paint, urethane, stain, or lacquer on woods.
Importantly, it is very safe because there is no NMP, caustic, or methylene chloride in the formula. The liquid is also biodegradable, low-odor, and non-flammable.
It works quite slowly, taking around half an hour. But this will help you monitor the process easily without any unintentional fault.
How to use:
Step 1: Wear safety gloves, glasses, and a mask.
Step 2: Use a brush, medium-sized paint roller, or airless paint sprayer to apply a coat of this product on the stain, varnish, paint, etc.
The thickness of the coat depends on the hardness of the stain. To eliminate fewer than 4 layers, apply a light coat.
In other cases, multiply the amount of Sunnyside 657G1A Paint & Varnish Remover you use to clean the spot effectively.
Step 3: Wait for 30 minutes, then use a putty knife to strip the stain.
Results:
This chemical works most efficiently against stain, paint, epoxy, urethanes, and varnish on wood, concrete, plaster, brick, masonry, stone, marble, veneers, and metal surfaces.
Pros
- Safe to use
- It is easy for users to monitor the process
- Powerful enough to remove up to a dozen of stain, paint, and varnish layers
Cons
- This product costs almost two times as much as other products in the same segment.
#5. Extreme Solutions EFC-38 Review
>>> Today’s Best Deal: Check Latest Price on Amazon
What is great about this product:
The Extreme Solutions EFC-38 facilitates your wood objects to be restored to their natural beauty.
It is designed to be an ideal solution for both weathered and new wood siding, fences, decks, and log homes that are attacked by gray of dead old wood, semi-transparent stains, mold, mildew, oil-based finishes, and grime accumulations.
How to use:
Step 1: Wear safety gloves, glasses, and a mask.
Step 2: Dissolve the powder in water and pour the mixture into a pump sprayer.
Step 3: Spray the solution onto surfaces and wait for it to dwell for about 30 – 45 minutes. During this time, try to keep the spot wet by continuously spraying more solutions when it begins to dry.
Repeat this step for a longer time if needed.
Step 4: Use a pressure washer or a brush and water to rinse the area thoroughly.
Results:
After roughly 35 minutes (depending on the toughness of the stain), all the mold, mildew, dead old wood, semi-transparent stains, oil-based finishes, or grime accumulations on both new and weathered wood surfaces will be lifted.
Pros
- Applicable to both new and weathered wood
- Can remove many different types of stains
- Simple to use
Cons
- The package includes too much content to be sold at an unnecessarily higher price.
- The high chances are that you will not use up the whole 10-pound container before it expires.
#6. RustAid GSX00101 Goof Off Review
>>> Today’s Best Deal: Check Latest Price on Amazon
What is great about this product:
The RustAid GSX00101 Goof Off is good at handling stubborn rust stains caused by well water, calcium deposits, or limescale on all outdoor surfaces.
You can apply it on wood, concrete, brick, stucco, fiberglass, vinyl siding, and painted surfaces.
Users can utilize this product to renew exterior walls, fences, walkways, driveway, shed, foundation, or lawn furniture.
How to use:
Step 1: Wear safety gloves, glasses, and a mask.
Step 2: Pour a moderate amount of the chemical into a pump sprayer.
Step 3: Spray on the surface and wait for around 25 minutes.
Step 4: Rinse the spot off with clean water. No brush is needed.
Results:
The RustAid GSX00101 Goof Off is a fantastic solution for houses that need all-around renewal.
In less than half an hour, ugly marks and stains on outdoor objects such as exterior walls, fences, lawn furniture made from wood, metal, concrete, brick, fiberglass, vinyl, stucco will disappear.
Pros
- Incredibly cheap
- Quick and easy to use
- Appropriate for numerous applications
- Safe to use near plants
Cons
- If you plan to utilize this product for indoor projects, forget it. The chemical is solely intended for outdoor uses.
#7. RMR-86 Stain Remover Review
>>> Today’s Best Deal: Check Latest Price on Amazon
What is great about this product:
The RMR-86 Stain Remover has superb effects against black mold and mildew stains.
You can use the product instantly on wood, bathtubs, concrete floors, decks, brick walls, drywall, vinyl siding, and tiles to fight back mildew spores and leave them no chance to return.
How to use:
Step 1: Wear safety gloves, glasses, and a mask.
Step 2: Pour a moderate amount of the chemical into a pump sprayer.
Step 3: Spray it on the surface and watch the stains fade out after 30 seconds. If any hardheaded stain does not vanish after your first try, repeat this step several times more.
Step 4: Rinse the spot off with clean water. No scrubbing or sanding is needed.
Results:
The RMR-86 Stain Remover is the most and only effective for removing mold and mildew-related stains on both porous and flat surfaces of wood, drywall, concrete, vinyl siding, tile & grout, decks, bathtubs, decks, and so on.
Pros
- Straightforward to use
- Alleviate bad odors
- Fit for multiple surfaces
Cons
- The bleach-based product is quite weak and will not have much impact on tough stains.
FAQ
Below here is common questions and answers about the Stain Remover for Wood Deck & Floor
#1. What to consider before buying a wood stain remover?
Here are things to consider before buying a wood stain remover.
Types Of Wood Stain Remover
Wood stain removers can be divided into many categories according to their uses. Determine the kinds of stains that you are facing to buy a suitable product that can remove them efficiently.
For example, if your wood deck, wardrobe, and staircases are intruded by oil-based and water-based stains, paint, and mold, you should buy a stain remover that is dedicated to handling these things.
Effectiveness
This factor depends on the toughness of the stains you are going to eliminate. If they are perennial stubborn stains, you are likely to need a chemical that is denser and stronger to remove them.
However, beware that too powerful chemicals may damage the wood surfaces or have bad effects on human health, plants, and pets.
Flexibility
We find that most products are widely applicable to many types of materials and stains, but not all are so.
Therefore, you ought to buy a product that can also work in other applications rather than only removing wood stains.
For instance, if you have stains, mold, sealers, varnishes, and rust on your wood deck, boat, glass, and metal tubes, you should purchase stain removers that contain OXALIC Acid or similar multi-purpose substances.
Buying a flexible product can cut down the cost dramatically when you have different issues to solve. So, make the most out of it.
Safety
As you can see, whatever types of products you are going to use, we always recommend wearing safety glasses, gloves and a mask to protect yourself.
However, utilizing a safe substance is always better because sometimes you, your family members, or your pet may still contact and get affected by the chemical.
This factor is particularly important should you want to apply the substance indoors.
It is a good idea to buy something with natural ingredients.
It will be eco-friendly, safe for plants, pets, and humans, and not require users to move items to outdoor or wait for the bad effects of chemicals to fade out.
#2. What is the best way to remove stains from wood?
The best method to eliminate on wood surfaces is using chemicals and dedicated wood strippers.
Although they may have bad smells and be toxic (depending on the products), they would not leave ugly traces like using heat methods.
Users just need to be cautious and well-prepared.
#3. How do you remove a stain without sanding?
Step 1: Buy a liquid or gel stripper or similar products.
Step 2: If you are going to remove stains on movable items, let’s take them outdoors. If you are going to work on fixed areas such as staircases, wrap the ambient area. Make sure that the liquid chemicals do not spread and damage unwanted spots.
Step 3: Wear safety gloves, glasses, and a mask to protect yourself.
Step 4: Use a dedicated paintbrush to brush liquid/gel strippers on the stains. Carefully monitor the progress and do not leave the chemical dry on the wood surface. (you should complete a small area before going to another).
Step 5: Once the wrinkle or bubble appears on the surface, it means the liquid/gel has softened the stains sufficient for scraping. Scrape stains off with a putty knife, a paint scraper, or a stiff-bristled scrub brush.
Step 6: Repeat the above steps until the stains disappear. Then you may have to rinse the area or do anything that is recommended by the manufacturer.
#4. Do I need to remove all stains before restaining?
This is not always necessary in all cases.
However, we still recommend removing all stains before you restain your wood items to create a uniform color on the whole surface.
#5. How long should the stain sit before wiping?
This amount of time depends on the solidity level of the stain and the performance of your stripper.
In general, you should wipe the stain when you see wrinkles or bubbles on it or other signs that the manufacturer mentions.
#6. Why Use A Wood Stain Remover?
Every material typically requires a specialized stain remover so that it is not ruined.
Therefore, you should never use anything else rather than a wood stain remover on wooden surfaces.
Wrapping up
Picking a proper wood stain remover is not too challenging.
What you need to do is simply read the product description to find out whether it is going to remove the right types of stains on the proper surfaces.
Then, make sure to take on safety measures.
And from our point of view, the Florida Laboratories ox5l OXALIC Acid 99.6% is the best wood stain remover since it is very cheap, versatile, and safe.
