Find essential tips to clean hardwood floors that are really dirty, and proper maintenance to restore the hardwood floor’s brand new and shiny look.
Dirt, stains, debris, or scratches on hardwood floors are tough to get rid of, especially if they have accumulated over a long time.
But with a proper plan and the right tools, any old damaged hardwood floors can regain their former shine.
Find out how to clean hardwood floors that are really dirty through this article.
- How to Clean Hardwood Floors with Vinegar and Olive Oil?
- How To Clean Kitchen Cabinets without Removing Finish?
What to prepare
To clean a floor that is already old and damaged, it would need a little more extra effort.
Before you start cleaning, it’s necessary to check the floor’s condition first.
Hardwood floors often have a thin layer of finish coat for protection. You can check the finish by putting a little water on the floor.
If the floor doesn’t absorb water, the finish is good to go. In case it does, you should avoid using water-based cleaners because the water-proof layer has been damaged.
After that, you need to check if there are any dried gums, paints, or other materials stuck on the floor that you need to scrape off. Apart from the regular broom, mop, and vacuum, you’ll need a knife or a spatula.
Furthermore, it’s also important to pay attention to the cleaning products. Some people might be interested in using natural remedies, but a specialized cleaning product for hardwood floors is much better.
You can check with an advisor for the safest and most suitable product for your specific hardwood floor, but the cleaner should at least be pH-neutral.
How to clean
To kick off your old hardwood floor spring-cleaning, let’s start by sweeping or vacuuming to take care of all the dust and dirt piled up.
The cracks between wood planks or the corners of the room are where the dirt stuck the most.
Therefore, you should sweep or vacuum the floor along the wood grain’s direction to get the most out of it and avoid scuffs on the surface.
Dirty old hardwood floors often have dried gums, dried paints, or other bits stuck on them. You can use a knife to scrape them away.
If the spots are sturdy, don’t try to scrape too hard because it’ll further leave scratches on the floor. Instead, you can place ice cubes or apply gasoline on the bits and try again after a few minutes.
After that, it’s finally time to clean every nook and cranny of the hardwood floor and glow them up like new.
If the floor is not too damaged and still has its finish coat, you only need to use the cleaning product chosen and follow the instructions.
It would be best if you sprayed the cleaner in a small area to test on your hardwood floor. After a few minutes, wipe it off with a damp mop to see if it can remove the stains well.
The most effective method to clean all the stains is to wipe in the figure-eight motion along the wood grain.
Ensure that the mop is not too wet, and the floor will be dry quickly, so the wood isn’t damaged by water.
In case the finish coat is already severely damaged, you need to remove the remains and refinish the hardwood floor.
Water-damaged or termite-damage boards should be replaced entirely. For the tough spots on the floor’s surface, you can sand them down before doing a complete refinish.
The finish coat does not only give the hardwood floor a brand new shiny look; it also acts as a seal against water and dirt.
If the floor does not have significant scratches, you can choose to recoat. It is a cheaper and effective option because recoating is applying a new layer of finish on top of the previous one.
Tips for the maintenance of hardwood floors
The best way to maintain the conditions of hardwood floors is to take care of them regularly and properly before they get dull.
You should sweep or vacuum daily and mop the floor with cleaners at least a few times a week. It’s much better to clean all the dust away before it accumulates in those hard-to-clean areas.
On top of that, spills on hardwood floors, such as coffee, tea, paint, or any other liquids, should be removed immediately. The longer you leave them on the floor, the harder it is to clean the stains, and they may even destroy the wood.
Furthermore, please make sure to minimize the possibility of flooding the areas that have hardwood floors to avoid permanent water damage.
Besides, choosing the right cleaning product is also important for the maintenance of hardwood floors.
Many people used to clean the floor with old natural remedies, but they are not actually helpful and might even be damaging.
Different hardwood floors require different types of cleaners, but the pH level should be about 7. Avoid using wax and oils because they make the floor slippery.
Finally, scratches and scuff on hardwood floors are not easy to fix, so you should be mindful of potential major damages.
Try not to use or drag heavy furniture and other equipment on the floor.
Cleaning dirty old hardwood floors would take a little more extra effort than usual, but it’s totally possible.
With the right cleaning techniques and a regular maintenance plan, you can keep the floors clean and shiny.
We hope that this article can help you know how to clean hardwood floors that are really dirty. Thanks for reading!